How to Install GNS3 1.5.4? – GNS3 is known as Graphical Network Simulation program. You can easily operate devices such as Cisco Switch, Router on GNS3.
How to Install GNS3 1.5.4?
By developing network designs with GNS3 you can develop yourself and become a network expert. Since the GNS3 program is a continuously updated program, you need to check for updates.
The GNS3 program is very similar to the Cisco Packet Tracer program. The biggest difference of the GNS3 program from the Cisco Packet Tracer program is the more extensive use of Cisco IOS images. In the GNS3 program, we can fully use Cisco IOS images. However, the Cisco IOS images in the Cisco Packet Tracer program is sometimes limited.
Our recommendation; You can purchase the Book of GNS3 written by Jason C. Neumann to gain more control over the GNS3 program.
The most basic program for people or individuals working on Cisco CCNA exams is the Cisco Packet Tracer program. The use of the GNS3 program is recommended for more advanced and professional network designs.
Before you install GNS3 1.5.4, you can download the latest version of the GNS3 program from the following computer.
After the process to install GNS3 1.5.4, you can read the article called “Adding Cisco IOS to GNS3” to add Cisco IOS images on GNS3.
Download GNS3 1.5.4
You can download the GNS3 program from below.
How to Install GNS3 1.5.4 ⇒ Video
After downloading the latest version of GNS3 1.5.4 from above, you can easily setup your computer by following the following video step by step.
As an example, you can test by creating a simple network on GNS3. You can communicate them by adding virtual computers to the workspace from GNS3 tools.
There are the most suitable Cisco images for GNS3. If you want to download these images, you can browse the article called “GNS3 Supported Cisco IOS Images Download“.
How to Install GNS3 1.5.4? – The GNS3 configuration consists of several steps. After adding the virtual computer after the GNS3 configuration, we performed a small test.