How to Run Windows 10 Enterprise 1809 LTSC UEFI on VM Workstation 15.1.0
After you setup it, you must create a new virtual machine for Windows 10 Enterprise 1809. To create a VM on VMware, follow the steps below in order.
Open VM Workstation 15 Pro and click Create a New Virtual Machine to create a Win VM.
In the New Virtual Machine Wizard window, select Typical (Recommended) and click Next.
After downloading the Windows 10 ISOfile to your computer, click the Browse button in the Installer disk image (iso) to add the ISO file to the virtual machine and click Next.
In the operating system selection window, select Microsoft Windows and then Win 10 x64 and click Next.
When installing a Windows, Linux, or macOS operating system with VMware, it is very useful to configure the VM installation location on another hard disk. In fact, you can achieve more performance by setting up a VM on an SSD disk.
After configuring the Windows virtual machine installation location, click Next.
For Windows 10 VM, configure the disk capacity to 60 GB and click Next.
Click the Customize Hardware button in Ready to Create Virtual Machine.
Configure the Windows 10 VM processor configuration as 2 processors / 2 cores. Also, enable Virtualization Engine options as follows.
Assign 4 GB RAM to the Windows virtual machine.
In the virtual machine Display setting, enable 3D Graphics / Accelerate 3D Graphics. Configure the Graphics Memorysetting to a minimum of 1 GB.
Click the Finish button to close the Hardware window.
Open the Win Enterprise 1809 LTSC virtual machine settings and enable UEFI / Enable Secure Boot from the Advanced section.
Run the Win 1809 virtual machine.
The process to setup Win UEFI on VM Workstation 15 will start as shown in the image below.
How to Install Windows 10 UEFI
After the installation of Windows on VMware Workstation 15 has started, please click on the image below to setup it!
How to Setup Win UEFI on VMware Software ⇒ Video
To setup it with VMware 15 Pro, you can watch the video below and you can also subscribe to our YouTubechannel to support us…
How to Run Windows 10 on a Virtual Machine with VM Workstation 14
In this title, we will setup Windows 10 on a new virtual machine using VM Workstation 14 Pro on a PC.
If you are going to create a network or test environment using VM Workstation, you can install and test Windows 10, 7, 8 and 8.1 operating systems or Linux distributions on your computer.
You can install and run various operating systems on your physical computer using virtualization programs. You can use one or more of the VMware, Hyper-V, or Oracle VM VirtualBox programs to run a virtual computer on your computer.
If you want to install Win10 using VirtualBox program, you can browse this article. Also, if the VMware Workstation 14/15 virtualization program not installed on your computer, check out these articles;
After you download the ISO file to your computer, extract the compressed file to the folder, and then follow the steps below to install Microsoft Win10 step by step.
How to Run Windows 10 on a Virtual Machine
First, you need to create a new machine to install Windows 10 using virtual machine. After you create a Windows virtual machine, you can start the installation by adding the downloaded ISO file to the VM.
To install a new virtual pc on VMware Workstation 12/14 or 15 step by step.
After you create a new virtual machine, follow the steps below to set up Windows 10 step by step.
Open VMware Workstation and click CD/DVD (SATA) to add the Windows ISO file you downloaded to your computer to the VM.
In the VM Settings window, select Use ISO image file.
Click the Browse button to show the location of the Windows ISO file.
Select the Microsoft_Windows_10_Enterprise_X64_EN.iso file and click the Open button.
Close the Virtual Machine Settings window by clicking OK.
To run the Windows VM, click the Power on this virtual machine button.
Wait while the Windows virtual machine is opening.
Windows installation starts on VMware …
Set the system language, keyboard layout and time you want to use for the Windows operating system and click Next.
Click Install Now to start the installation process.
Windows installation is starting …
Accept the Windows license agreement and click Next.
Click on the Custom option to make a clean Microsoft Win 10 installation.
Click New to configure the VMware virtual disk.
To use the entire disk, leave the Size field at the default value and click Apply.
Click OK in the info window to create additional partitions on the Windows disk.
Select Drive 0 Section 2 and click Next to continue the installation.
Wait while preparing files for installation. This may take some time depending on the performance of your computer and your virtual machine hardware settings.
Installing Windows on VMware Workstation …
After the installation copy the required files, the virtual machine will automatically restart.
Click the Use Quick Settings button.
Wait while making the necessary settings.
Type a user account name for your Windows virtual machine and click Next.
Wait while the setup is making the required settings.
Wait while the Windows desktop is getting ready.
Please wait on the “we are making the settings for you” screen.
Wait while preparing Windows applications.
We have completed Windows installation steps successfully using VMware!
The Windows start menu view is as follows.
To check the version of the Windows operating system, right-click on My Computer, and then click Properties. You can check the Windows version in the System window.
How to Setup Windows 10 ⇒ Video
You can watch the video below to install Microsoft Windows system on your computer using VMware Workstation 12.
In this article, we have installed the most recent version 1809 of Windows on PC/Laptop using VMware. Thanks for following us!